Salerno – Matt Black Concealed Shower System

Four black elements are arranged on a light gray background. No visible pipes, no vertical bars. The control panel is recessed into the wall, flush, rectangular, with two square controls side by side. Above, a horizontal wall arm supports an ultra-thin square rain shower head. To the right, a wall mount holds a cylindrical hand shower connected by a black braided hose. At the bottom, a horizontal spout extends directly from the wall. This matte black recessed shower column is entirely integrated into the partition, with no visible structural elements on the outside.

The control panel centralizes all interactions. It features a central lever for flow and outlet selection, and a temperature adjustment knob. The angles are right, the surfaces flat. The square rain shower head is perforated with a grid of tightly packed nozzles across its entire surface. The spout at the bottom is a short, horizontal tube with a square cross-section. Each piece shares the same dense, non-reflective matte black finish, giving the whole a total visual coherence.

On a tiled wall, the installation leaves the surface almost intact. Only the control panel, shower head arm, hand shower holder, and spout emerge from the tiling. Against a light covering, the matte black creates four precise visual focal points. Against dark tiling, the elements blend into the wall color, and only the shapes remain legible. The absence of a column or vertical bar frees up perceived space in the shower.

Matte Black Recessed Shower Set with Square Rain Shower Head, Wall-Mounted Spout, and Dual Control Panel for In-Wall Installation

The rain shower head is available in three diameters: 25, 30, or 40 cm. The 25 cm size is suitable for narrow shower niches or configurations where the distance between the wall arm and the shower area is short. The 30 cm is suitable for standard cabins of 80 to 90 cm. The 40 cm requires a walk-in shower of at least 100 cm width so that the rain falls entirely within the designated space, without overflowing onto adjacent walls.

This model is available in a 2-way configuration, allowing the rain shower head or hand shower to be supplied alternately via the selection lever on the panel. The side spout provides a third fixed outlet, independent of the selection system, useful for filling a bathtub or rinsing the floor. The choice of shower head diameter also affects the perceived pressure: a large shower head with identical flow produces a more diffuse rain than a more compact size.

To find other compatible models in black finish or to complete this set, the recessed shower columns and bathroom faucets & mixers collections include matching products in terms of surface treatment and installation style.

Matte Black Recessed Shower with Integrated Spout for Wall Installation without Visible Pipes

The matte black coating resists permanent humidity without corroding. It is less susceptible to limescale marks than polished chrome, as whitish deposits are less visible on a dark, non-reflective surface. Wiping with clean water is sufficient for routine maintenance. Abrasive products and acids should be avoided, as they irreversibly damage the surface layer.

This matte black recessed shower column works in contemporary interiors with a mineral dominant, large white or gray tiles, light marble, waxed concrete, where matte black provides precise contrast without cluttering the wall. It is also suitable for bathrooms with dark tones, anthracite or deep green tiles, where the black finish naturally blends into the wall covering. The presence of the spout also makes it a relevant choice for combined bath and shower configurations in the same space.

The black recessed shower is a dual-control set, with an integrated spout and a square rain shower head, where all the plumbing disappears into the wall except for the water outlet elements.